Your laptop restarted for a Windows update and now the screen is black. Do not assume the laptop is dead.
In short: Press Win + Ctrl + Shift + B to reset the graphics driver, then Win + P to cycle the display mode. If the screen stays black, open the Windows Recovery Environment, start in Safe Mode, and roll back the display driver or uninstall the latest update.
Key takeaways
- A black screen after an update is usually a driver or display problem, not a dead laptop.
- Win + Ctrl + Shift + B resets the graphics driver without closing your apps.
- Safe Mode loads only basic drivers, which shows if a driver is the cause.
- Uninstall the latest quality update first: monthly updates are the usual trigger.
- A screen black in Safe Mode points at hardware.
What the black screen is telling you

A black screen is not one problem. Microsoft says a black screen with a cursor often means a stalled process or driver, while one after an update is frequently tied to a driver that does not suit the update.
First, check whether the laptop is on. Look for the power light, listen for the fan, and press Caps Lock. If nothing happens, it is a power problem. If the fan spins but the screen stays dark, Windows is probably running with no picture.
| Symptom | Likely cause | Fix |
|---|---|---|
| Black screen, cursor visible | Stalled process or driver | Restart Explorer |
| Black after sign-in | Display mode or driver fault | Win + Ctrl + Shift + B, then Win + P |
| Black before sign-in | Driver or update fault | Safe Mode, roll back driver |
| No lights, no fan | Power or battery fault | Charger and power checks |
| External monitor works | Panel, cable, or backlight fault | Repair the screen assembly |
With no update involved, see our general guide to fixing a laptop black screen.
2-minute checks first
Try these in order, with the charger plugged in.
- Press the brightness up key a few times: it usually sits on a top-row key with a sun symbol, and you may need to hold Fn with it.
- Press Win + Ctrl + Shift + B together to reset the graphics driver. Microsoft says you should hear a beep or see the screen flicker if it worked.
- Press Win + P, then tap P again and press Enter. Repeat a few times. This cycles through PC screen only, Duplicate, Extend, and Second screen only.
- Press Ctrl + Alt + Del. If the security screen appears, Windows is running: choose Task Manager.
- Unplug every accessory: USB drives, hubs, docks, and external monitors. Then try the shortcuts again.
- Plug in an external monitor or TV with an HDMI cable and restart the laptop. A picture there means Windows and the graphics chip work, and the fault is in the laptop screen.
Restart Windows Explorer if you can see a cursor

A black screen with a moving cursor means Windows loaded and the desktop shell did not. Windows Explorer draws the desktop and taskbar, and restarting it often brings them back without a reboot.
Press Ctrl + Shift + Esc to open Task Manager. Find Windows Explorer, right-click it, and choose Restart. If it is not listed, choose File, then Run new task, type explorer.exe, and press Enter.
Open the Windows Recovery Environment
Most of the remaining fixes live in the Windows Recovery Environment, known as WinRE, which loads before the normal desktop.
To get in, interrupt startup twice: turn the laptop on, and as soon as the logo appears, hold the power button until it shuts down. On the third start, Windows should show the Automatic Repair screen. Choose Advanced options.
If you can reach the sign-in screen, hold Shift while you choose Power, then Restart. From Settings, go to System, then Recovery, then Restart now next to Advanced startup.
Warning: If your drive is encrypted with BitLocker, WinRE may ask for the 48-digit recovery key before some tools will run. Find it at your Microsoft account page first.
Start in Safe Mode and see what changes

Safe Mode starts Windows with only a basic set of files and drivers. If the screen works in Safe Mode, the cause is software that loads during a normal start. If it stays black, the fault is deeper.
From the WinRE menu, choose Troubleshoot, then Advanced options, then Startup Settings, then Restart. After the restart, press 4 or F4 for Safe Mode, or 5 or F5 for Safe Mode with Networking. Sign in with your account password.
Roll back the display driver
Updates often bring a new graphics driver, and one that does not suit your laptop can leave the screen black. Rolling back returns the device to the previous driver version Windows still has stored.
- In Safe Mode, right-click Start and choose Device Manager.
- Expand Display adapters, right-click your graphics device, and choose Properties.
- Open the Driver tab and check the date. If it matches the update, you have found the cause.
- Choose Roll Back Driver, pick a reason if Windows asks, and choose Yes.
- Restart the laptop normally and watch whether the desktop appears.
If Roll Back Driver is greyed out, Windows has no previous driver version stored. Use Update driver instead, or download the driver from your laptop maker support page on another computer. Our guide on how to update drivers on a laptop walks through the safe way to do that. Never download drivers from a random driver site.
Uninstall the update that caused it

If the screen went black right after a specific update, removing that update reverses the change that broke startup.
From WinRE, choose Troubleshoot, then Advanced options, then Uninstall Updates. You will see two choices: Uninstall latest quality update and Uninstall latest feature update. Start with the quality update, since monthly updates are the most common trigger. Follow the prompts, then restart.
If you can reach the desktop or Safe Mode, do the same from Settings: Start, then Settings, then Windows Update, then Update history, then Uninstall updates. Pick the update dated when the trouble started and choose Uninstall.
Once the laptop works again, pause updates for a week or two so the same update does not reinstall before a fixed version arrives: Settings, then Windows Update, then choose a pause length next to Pause updates.
After the pause ends, install the latest update, since it may carry the official fix. If the laptop charges badly after an update, see our guide on a laptop not charging after a Windows update.
Run System Restore to a point before the update
If uninstalling the update does not help, System Restore can take the system back to a point before the black screen started. It rolls back system files, drivers, and settings, while your personal files stay where they are.
From WinRE, choose Troubleshoot, then Advanced options, then System Restore. Pick a restore point from before the update was installed, confirm, and let it finish without turning the laptop off.
System Restore only works if restore points were being created before the problem. If none exists, try Startup Repair instead: it sits on the same Advanced options screen and tries to fix the startup files on its own.
Warning: Back up your files before you try a reset or a clean install: Reset this PC with the remove-everything choice deletes them, and a clean install wipes the drive. Copy your files to a USB drive or cloud storage first.
When it is a hardware problem
Software fixes have a clear limit. If the screen stays black in Safe Mode and shows nothing on an external monitor, the fault is likely in the hardware, not in Windows.
Read the external monitor test again. A picture there with a black laptop screen points at the laptop panel, the display cable, or the backlight. No picture on either screen, with the fan spinning and lights on, points at the graphics chip, memory, or the board.
A screen that flickers or changes when you move the lid points at the cable or hinge. If the picture flickers rather than staying black, our guide on how to fix a laptop screen flickering covers that fault. Do not open the laptop to reseat the cable: it is thin, the clips break easily, and opening the case can void the warranty.
When to repair or replace
Take the laptop to a repair shop if Safe Mode stays black or no external monitor shows a picture. Tell the shop what you already tried.
Ask for a diagnosis and a written quote before agreeing to a repair. A screen or cable replacement is usually worth it. A board or graphics chip repair costs more, so compare the quote with a replacement first. If the laptop is still under warranty, contact the maker first: opening the case yourself can end the warranty.
How to stop it happening again
Keep the charger plugged in while updates install: losing power mid-update can leave the screen black.
Make a recovery drive now, while the laptop works: it gives you a way into WinRE if the built-in recovery files are damaged. Our guide on how to create a Windows 11 recovery drive covers it. Install updates promptly once the laptop is healthy again: the fixed version of a bad update is the real end of the problem.
Mistakes to avoid
Jumping straight to a reset or clean install. A reset wipes apps and settings, and a clean install wipes everything. Fix: try the display shortcuts and Safe Mode first.
Turning the laptop off during an update. An update that looks stuck may still be working, and cutting the power mid-install can corrupt system files. Fix: if the drive light blinks, wait at least 30 minutes first.
Removing the update and then switching updates off for good. The bad update goes away, but so do the security fixes after it. Fix: pause updates for a week or two, then install the latest update.
Deleting the display driver with no replacement ready. Uninstalling the graphics device can leave you with a basic display and no driver to install. Fix: roll back first, and only uninstall if you already have the maker driver on a USB drive.
Opening the laptop before ruling out software. A black screen after an update is usually software, and opening the case risks the cable and the warranty. Fix: finish the Safe Mode and external monitor tests first.
Frequently asked questions
Why does a laptop screen go black after a Windows update?
An update can replace the graphics driver with a version that does not suit the laptop. Microsoft says a black screen after an update is frequently tied to incompatible drivers or an incomplete update. The driver or the update is the usual cause, not a dead screen.
How long should I wait before trying a fix?
Give the laptop a few minutes, since an update can keep working with a black screen. If the drive light blinks or the fan runs, wait at least 30 minutes. If nothing changes, start with Win + Ctrl + Shift + B.
Can I uninstall a Windows update from Safe Mode?
Yes. In Safe Mode, go to Start, then Settings, then Windows Update, then Update history, then Uninstall updates, and pick the update dated when the trouble started. If Safe Mode will not open, use WinRE: Troubleshoot, then Advanced options, then Uninstall Updates. Not all updates can be removed.
Will System Restore delete my files?
No. System Restore rolls back system files, drivers, and settings to an earlier restore point, and your personal files stay where they are. Apps installed after the restore point may need to be reinstalled. It only works if restore points were being created before the problem.
What if the screen is still black in Safe Mode?
A black screen in Safe Mode points at hardware, since Safe Mode skips the drivers behind most software black screens. Test an external monitor: a picture there means the panel, cable, or backlight has failed. No picture on either screen points at the graphics chip, memory, or board.
Bottom line: A laptop black screen after a Windows update is usually a stuck graphics driver or a bad update, not a dead laptop. Try Win + Ctrl + Shift + B and Win + P first, then Safe Mode, a driver roll back, and uninstalling the update. If the screen stays black in Safe Mode and on an external monitor, get a repair quote. Browse the troubleshooting hub.
Sources: Microsoft Support, Troubleshooting blank screens in Windows; Microsoft Support, Windows Recovery Environment; Microsoft Support, Windows Update: FAQ. Photos: Artem Podrez, Hanna Pad, Matheus Oliveira, Mikhail Nilov and Found GHI via Pexels. Diagram: ictservicecenter.com.
