Skip to content

Laptop Cooling Mods for Gaming: Step-by-Step Fixes

Owen HaleBy Updated 7 min read

As an Amazon Associate we earn from qualifying purchases, at no cost to you.

Fix path (8 sections)
  1. Start with software tweaks to cut heat instantly
  2. Repaste the CPU and GPU for a major temperature drop
  3. Undervolt the CPU to run cooler at the same speed
  4. Add external airflow with a cooling pad or stand
  5. Clean the internal fans and vents to remove dust
  6. When to stop and seek professional help
  7. The bottom line
  8. Frequently asked questions

You launch a new game, but within ten minutes your laptop gets too hot to touch and the frame rate drops into single digits. This page walks you through the specific hardware mods and software tweaks that stop that throttle, starting with the safest fixes first.

In short: The most effective mods for cooling a gaming laptop are repasting the processor, undervolting via software, and adding external airflow with a cooling pad. Start with software tweaks and cleaning, then move to hardware swaps like thermal paste replacement. These steps directly reduce the temperature of the CPU and GPU, allowing them to run at full speed without shutting down.

Quick picks

Our shortlist for this job · tap one to see today's price
Best for immediate passive coolinghavit HV-F2056 Laptop Cooling Pad for 15.6-17 Inch Laptops

Elevates the laptop and adds airflow, easily dropping temps by 3-5 degrees during long gaming sessions.

Check price on Amazon
Best for chronic overheatingARCTIC MX-7

High-performance thermal paste that replaces dried factory compound, significantly improving heat transfer to the heatsink.

Check price on Amazon

Start with software tweaks to cut heat instantly

Laptop Cooling Mods for Gaming: Step-by-Step Fixes

Before touching any hardware, you can make significant thermal improvements by changing how Windows manages power. The default settings often prioritize performance over temperature, keeping the CPU and GPU running hotter than necessary during light tasks. We cover fixing cpu slowdown in a guide of its own.

The first step is adjusting the processor power management settings. This limits the maximum power draw of the CPU, preventing it from boosting to its highest frequency when the extra speed isn’t critical for your current game settings.

Second, check your power plan. Ensure you are not on a high-performance plan that forces the fans to maximum speed constantly. Instead, use a balanced plan that lets the system modulate fan speed based on actual temperature.

  • Disable Turbo Boost: Go to Control Panel > Hardware and Sound > Power Options. Select your active plan, click “Change plan settings,” then “Change advanced power settings.” Expand “Processor power management” and set “Maximum processor state” to 99%.
  • Check Cooling Policy: In the same advanced settings window, find “System cooling policy.” Set it to “Active” for both On battery and Plugged in. This tells the OS to throttle the CPU before shutting it down to save power.

Pro tip: Setting the maximum processor state to 99% disables Intel Turbo Boost. You lose a small amount of peak performance but gain significantly lower temperatures and reduced fan noise.

Repaste the CPU and GPU for a major temperature drop

If your laptop is more than two years old, the factory thermal paste is likely dried out and acting as an insulator. Replacing it with a high-conductivity compound is one of the most effective hardware mods you can perform.

The thermal paste sits between the heat-generating chip and the metal heatsink. When it dries, heat transfer becomes inefficient, causing the chip to run hotter and the fans to spin louder. A fresh application restores the original thermal efficiency.

This process requires opening the laptop chassis. You must identify the CPU and GPU heat pipes, clean the old paste with isopropyl alcohol, and apply a small amount of new paste. Before you buy anything, it is worth looking at disassembling the input device.

  • Prepare the area: Power off the laptop, unplug it, and remove the battery if possible. Open the bottom panel and ground yourself to avoid static damage.
  • Clean the old paste: Gently wipe the chip and the heat pipes with a lint-free cloth dampened with isopropyl alcohol until the surface is shiny and clear.
  • Apply new paste: Place a small, pea-sized dot of ARCTIC MX-7 thermal paste in the center of the CPU and GPU. Do not spread it; the pressure from the heatsink will distribute it evenly.

Safety first: Always disconnect the battery before working on the internals. If you are uncomfortable removing the heatsink, stop and take it to a professional to avoid cracking the chip.

Recommended for this stepARCTIC MX-7

ARCTIC MX-7 is a high-performance paste that is dense and viscous, designed to fill microscopic gaps between the chip and heatsink for long-term thermal stability.

  • MX-7 features a performance-optimized, dense, and highly viscous consistency. Its high
  • High cohesion prevents pump-out, dry-out, or bleeding even under repeated thermal
Check price on Amazon

Undervolt the CPU to run cooler at the same speed

Undervolting is a software mod that reduces the voltage supplied to the CPU. Since heat is a byproduct of electrical resistance, lowering the voltage directly reduces the heat generated.

For Intel processors, tools like ThrottleStop or Intel XTU allow you to fine-tune the voltage offset. You are essentially telling the chip to work more efficiently, so it doesn’t need as much power to reach the same clock speed.

This is a precise adjustment. You must find the lowest voltage that still allows the CPU to run stably under load. If the voltage is too low, the system will crash. If it is too high, you aren’t getting the full cooling benefit.

  1. Download a reputable undervolting tool suitable for your CPU architecture.
  2. Run a stress test while gradually lowering the voltage offset in small increments.
  3. Monitor the temperature and stability. If the system remains stable and temps drop, you have found a good undervolt setting.

Add external airflow with a cooling pad or stand

Laptops are designed with specific airflow paths. When placed on soft surfaces like a bed or carpet, the intake vents are blocked. A cooling pad or stand elevates the laptop, allowing air to flow freely underneath.

Active cooling pads use fans to push cool air into the laptop’s intake vents. Passive stands simply create space. Both methods reduce the temperature of the intake air, which lowers the overall chassis temperature. Loaders in this spot often ask about keeping the cpu cooler as well.

For gaming, where sustained loads are common, an active cooling pad is usually the better choice. It works in tandem with the laptop’s internal fans to move more heat out of the system.

  • Active Cooling Pad: Look for a pad with large, quiet fans. The Havit HV-F2056 is a solid option that also adjusts in height, doubling as an ergonomic stand.
  • Passive Stand: A simple aluminum stand is quiet and cheap, but it relies entirely on the laptop’s own fans. It is less effective for heavy gaming than a fan-equipped pad.

Pro tip: Do not rely solely on a cooling pad if your laptop is dirty. A pad cannot clean out clogged internal fans; it only cools the incoming air. Combine it with internal cleaning for the best results.

Recommended for this stephavit HV-F2056 Laptop Cooling Pad for 15.6-17 Inch Laptops

The Havit HV-F2056 combines an active cooling fan with an ergonomic stand, making it a practical choice for lowering temps during long gaming sessions on a desk.

  • Ultra-Portable: Slim, portable, and light weight allowing you to protect your
  • Ergonomic Comfort: Doubles as an ergonomic stand with two adjustable height settings
Check price on Amazon

Clean the internal fans and vents to remove dust

Dust is the primary enemy of laptop cooling. Over time, it accumulates on the fan blades and the heatsink fins, acting as an insulating blanket. This forces the fans to spin faster to move the same amount of heat.

For a quick fix without opening the laptop, you can use compressed air to blow out the vents. However, this is often a temporary solution because it does not remove the dust caked on the heatsink fins.

A deep clean requires opening the case. You will need to hold the fan blades stationary while spraying air into the heatsink. This prevents the fan from spinning too fast and damaging the bearings.

  1. Power off the laptop and remove the battery.
  2. Open the bottom panel to access the cooling system.
  3. Hold the fan blade still with a finger and use short bursts of compressed air to clear the fins.
  4. Reassemble the laptop and monitor the temperature under load.

When to stop and seek professional help

Some laptops have cooling systems that are undersized for their hardware. If you have cleaned the internals, repasted, and undervolted, but the laptop still throttles or shuts down, the physical design may be the limit. Loaders in this spot often ask about reducing the internal heat levels as well.

Signs that you need professional help include the fan making grinding or whining noises, which indicates bearing failure. You may also notice uneven heat distribution, where one side of the laptop is much hotter than the other.

In these cases, a repair technician can replace a faulty fan or perform a more comprehensive thermal maintenance. Do not attempt to repair a failing fan yourself if you are not confident, as it can damage the logic board.

  • Whining or grinding noises: This is a clear sign of a failing fan bearing. Replace the fan immediately to prevent damage.
  • Persistent throttling after all mods: If the system still caps its performance, the cooling solution may be inadequate for the workload. Consider lowering game settings or using a lower power profile.

The bottom line

Start with software tweaks and internal cleaning, as these are free and safe. If your laptop is older, investing in a new thermal paste application is the single most effective hardware mod. For most users, adding a cooling pad will provide an immediate and noticeable reduction in temperature during gaming. If these steps do not resolve the issue, consult a professional for fan replacement or further thermal analysis.

Our top pickARCTIC MX-7
  • MX-7 features a performance-optimized, dense, and highly viscous consistency. Its high
  • High cohesion prevents pump-out, dry-out, or bleeding even under repeated thermal
Check price on Amazon

Frequently asked questions

Will undervolting void my laptop warranty?

Undervolting is a software adjustment and does not physically modify the hardware. Therefore, it typically does not void your warranty. However, if you set the voltage too low and cause system instability that damages the hardware, that would not be covered. Always back up your data before making these changes.

How often should I clean my laptop's vents?

It depends on your environment. In dusty areas or if you have pets, clean the vents every three to six months. In a clean home environment, an annual check is usually sufficient. If you notice the fans getting louder, it is time for a clean.

Can I use liquid cooling in my laptop?

No, standard laptops are not designed for liquid cooling. Some high-end mobile workstations have experimental liquid cooling, but for consumer gaming laptops, thermal paste, air cooling, and undervolting are the standard effective mods.

Is it safe to use a cooling pad while plugged in?

Yes, it is perfectly safe. In fact, it is recommended. Plugging in the laptop while gaming provides maximum power for the CPU and GPU, which generates more heat. The cooling pad helps dissipate this excess heat, keeping the components at a stable temperature.

What is the best thermal paste for a laptop?

High-conductivity pastes like Arctic MX-7 or MX-6 are the industry standard. They offer a significant improvement over the stock paste that comes with most laptops. Avoid using cheap, low-quality pastes, as they can dry out quickly and perform worse than the original compound.

Up nextHow to Remove a Touchpad From Your Laptop Step by Step

Learn how to remove a laptop touchpad without damaging the ribbon cable or frame. Follow the exact disassembly order, tool list, and safe recheck…

Bench rules: back up first, power off and unplug, disconnect the battery before touching the board, and stop if a battery is swollen or smells. If the laptop is under warranty, check what opening it does to the cover.

Owen Hale
Repair editor

Owen Hale is the pen name of the ICT Service Center editor. Guides are built from manufacturer service manuals, Microsoft and Apple support documentation and everyday repair-bench practice, safest step first.

Follow on PinterestFix-it checklists, upgrade cheat sheets and repair steps, saved to boards by problem.

More Care & Maintenance guides