Your MSI laptop is running hot because dust or a soft surface is blocking the airflow vents. This guide shows you exactly which vents to keep clear and how to unblock them in five minutes.
In short: Laptops like MSI gaming models rely on rear and bottom vents to pull in cool air and push out heat. Blocking these vents with pillows, blankets, or dust causes rapid overheating. Keep the vents on a hard, flat surface and clean the grilles gently to maintain airflow.
Quick picks
Our shortlist for this job · tap one to see today's priceLifts your laptop to create a gap under the chassis, preventing the bottom intake vents from touching the table or carpet.
Sits under the back of your MSI laptop to actively push cool air toward the exhaust vents, reducing heat buildup.
What you need to keep MSI vents clear
Before you start, gather these simple tools. You do not need to open the laptop to fix airflow issues. For the detail, see our notes on how to safely clear out built-up dust.
- Soft-bristle brush: A clean paintbrush or makeup brush to loosen dust from vent grilles.
- USB vacuum or canned air: To remove loosened dust. A vacuum is safer than compressed air for vents.
- Microfiber cloth: To wipe around the vents without scratching the chassis.
- Laptop stand or riser: To physically block the bottom vents from being covered by a surface.
A stand is the most direct way to ensure your laptop’s bottom intake vents never touch a table or carpet.
MSI laptops have dense components. When you buy a stand, look for one that supports at least 17 inches if you have a large model. A thin gap is enough, but it must be rigid so the laptop does not wobble.
Pro tip: MSI laptops usually have main intakes on the bottom or front and exhausts on the back. Check your specific model's manual to confirm.
Elevates the laptop to keep the bottom intake vents clear of the desk surface.
- Widely Used: The stand can be used for laptop, Tablet, Keyboard, etc, fits such as
- Easy to Carry: (Dimension: 6.3 x 3.39 x 1.38 inch/Weight: 4.2 oz) The stand is small
Step 1: Lift the laptop to unblock bottom vents
- Place your MSI laptop on a hard, flat surface.
- Insert a stand or riser under the back edge of the laptop.
- Ensure the bottom vents have at least one inch of clearance from the desk.
Many MSI gaming laptops draw air in through the bottom chassis. When the laptop sits flat on a desk, those vents are partially covered, forcing the fan to work harder. Lifting the rear creates a tunnel of air that flows underneath the device.
If you do not have a stand, a few washers or a folded piece of cardboard can create a similar gap. Do not use thick foam pads, which can trap heat and block the vents.
Check the bottom of your MSI model. If you see mesh grilles on the underside, this step is critical. The metal mesh is where the cool air enters.
If that mesh is flat against a wood grain table or a fabric desk mat, the airflow path is cut off. You need physical space for air to move. For the detail, see our notes on how to maintain a ssd in laptop.
Step 2: Clean vent grilles without forcing dust inside
- Power off the MSI laptop and unplug the charger.
- Use a soft brush to gently sweep dust out of the rear and side vent grilles.
- Use a USB vacuum or canned air to remove the loosened dust.
Dust accumulation is the most common cause of blocked airflow. However, you must be careful not to push dust deeper into the internal fans. A vacuum is safer than compressed air because it pulls dust out rather than forcing it in.
Hold the laptop at an angle so gravity helps the dust fall away from the vents. Do not submerge the vents in water or use wet wipes, which can damage the electronics.
When using compressed air, hold the can upright. If it tilts, liquid propellant may spray out and enter the laptop. Short bursts are better than long streams. Stand on one side so the air moves dust out, not across the fan blades.
Safety first: Never use compressed air at high pressure inside the vents. It can spin the fan blades uncontrollably, generating dangerous electricity and damaging the fan motor.
Step 3: Use a hard surface to prevent vent smothering
Soft surfaces like beds, couches, and thick blankets are the biggest enemy of laptop airflow. These materials trap hot exhaust air and block the intake vents underneath the laptop.
- Do: Use a desk, table, or lap desk with a hard top.
- Don’t: Place the laptop directly on your lap or a pillow.
If you must use the laptop in bed, place a sturdy board or hard cover under it first. This creates a barrier that allows air to flow freely into the bottom vents. Loaders in this spot often ask about keeping the cpu cooler as well.
MSI laptops generate significant heat when gaming. Fabric covers the vents and holds the heat in. The laptop cannot expel that heat, so the internal fans spin up to maximum speed, creating noise and reducing performance. A hard surface reflects heat away and allows air to circulate.
Step 4: Check for blocked rear exhaust vents
The rear of an MSI laptop is where the hot air escapes. If you have the laptop against a wall, bookshelf, or in a tight bag, the exhaust vents are covered. This causes the hot air to cycle back into the laptop.
- Move the laptop away from walls and shelves.
- Ensure at least six inches of space behind the exhaust vents.
- Check that cables are not covering the vents.
When the exhaust is blocked, the internal temperature rises quickly. The fan will spin at maximum speed, creating noise and strain without actually cooling the system.
Many users place their laptops in corners of their desks. This looks tidy but is thermally inefficient. The hot air is trapped between the laptop and the wall. It cannot dissipate into the room. Move the laptop to the center of your workspace if possible.
Step 5: Monitor fan speed and temperature in MSI Dragon Center
MSI laptops come with Dragon Center or MSI Center software. These tools allow you to check your fan profile and monitor system temperatures without opening the case.
- Open Dragon Center.
- Click on Live Update or Hardware to see current CPU/GPU temperatures.
- Check if the fan profile is set to Standard or Full Force.
If the temperature is high despite clear vents, switch to a cooler fan profile if your workload allows. This reduces heat generation and extends the life of your internal components.
You can also check the BIOS settings. Restart your laptop and press F2 to enter the BIOS. Look for the Hardware Monitor tab. Here you can see if the fan is responding correctly to temperature changes. If the fan is not spinning when the temperature is high, the fan may be failing.
Common mistakes that block MSI laptop airflow
- Mistake: Using a cooling pad that does not align with the vents.
Fix: Ensure the pad’s fans are positioned to blow air toward the bottom or rear intakes, not the plastic side panels. - Mistake: Leaving the laptop in a hot, enclosed space.
Fix: Move the laptop to a cooler room. Ambient temperature directly impacts how effectively your vents can cool the system. - Mistake: Ignoring dust on the battery compartment.
Fix: Dust often collects near the bottom vents where the battery slides in. Clean this area gently with a brush to ensure unobstructed airflow.
Another common error is using a phone case as a riser. It is too thick and unstable. It can crack the back of the laptop. Use a proper stand.
Do not place magnets near the vents. Some cooling pads use magnetic mounts. If the magnet is strong, it can interfere with the internal sensors or the SSD. Keep them away from the ventilation grilles.
A dual-fan pad like this can actively push air toward the vents if positioned correctly.
- Keep Cool While Working: Targus 17" Dual Fan Chill Mat gives you a comfortable and
- Double the Cooling Power: The dual fans are powered using a standard USB-A connection
The bottom line
The quickest way to stop covering your MSI laptop's airflow is to lift the bottom vents with a stand and clean the rear grilles with a soft brush. If you game or work in hot rooms, a cooling pad that aligns with your specific vents can provide extra relief. Start with the free fixes: hard surface, clear rear space, and regular dust removal.
- Widely Used: The stand can be used for laptop, Tablet, Keyboard, etc, fits such as
- Easy to Carry: (Dimension: 6.3 x 3.39 x 1.38 inch/Weight: 4.2 oz) The stand is small
Frequently asked questions
Where are the vents on an MSI laptop?
Most MSI gaming laptops have intake vents on the bottom or front sides and exhaust vents on the rear. Some models have vents on the sides near the hinges. Check your model’s user manual for the exact layout.
Is it safe to use a vacuum on laptop vents?
Yes, a low-suction USB vacuum is safe and effective. It removes loose dust without the risk of spinning the fan blades uncontrollably, which can happen with compressed air.
Why does my MSI laptop get hot on a desk?
If the desk surface is soft or the laptop is against a wall, the vents may be blocked. Also, internal dust buildup reduces efficiency. Clean the external vents and ensure the bottom is elevated slightly.
Do cooling pads really work for MSI laptops?
They work best when aligned with the laptop’s intake vents. A generic pad that blows air at the side panel is useless. A stand that lifts the laptop is often more effective than a fan pad for basic cooling.


